Table of Contents
Advertisement
Control guide
Control panel
Standby/on switch
( pages 22 to 24)
Display
DIGITAL
: Dolby Digital sources
DTS
: DTS sources
VS
: When Dolby Virtual Speaker is working
SFC
: When you are using an SFC mode
Amplifier
AC inlet ( page 22)
Exhaust hole (Cooling fan)
Speaker terminals
The speakers are already connected. Do not touch the connectors unless absolutely necessary.
If the connectors become disconnected, refer to the illustrations below for connection.
Connector connection
Green
Purple
Purple
Green
8
RQTX0165
Standby indicator
( page 22)
When input signal is fixed to PCM ( page 33)
Digital surround signal/Sound field ( below, pages 26 and 27)
General display
Speaker terminals
Audio input terminal
( pages 16, 17, 19 and 21)
How to attach the connectors
Red
White
White
Red
For adjusting volume ( page 24)
ゲーム
ゲーム
（ サウン ド ）
（ サウン ド ）
For using "WHISPER MODE SURROUND"
( page 29)
When input signal is digital
PCM
DIGITAL INPUT
DIGITAL DTS
VS
SFC
PL
: When Dolby Pro Logic
PLⅡ
used
(When using Dolby Virtual Speaker on
2 channel stereo source)
Digital input terminal ( pages 17 to 21 and 28)
HDMI terminal ( pages 17 and 28)
Terminal block
Make sure the color on the connector
indicates the same as corresponding
terminal and insert the connector straight all
the way.
Connector
VOLUME
WHISPER MODE
INPUT
SURROUND
SELECTOR
"INPUT SELECTOR"
switch ( page 24)
When input signal is fixed to
DTS ( page 33)
decoder is being
Advertisement
Table of Contents
