Canon Power Shot A400 User Manual page 29

Shooting Mode
Exposure Compensation
White Balance
Drive Mode
ISO Speed
Photo Effect
Light Metering Mode
Compression
Resolution
Postcard Print
Flash
Red-eye Reduction
Macro/Infinity Mode
Quick Shots
Auto Rotate Function
(Red) Movie Recording Mode
2.8x 3.5x 4.4x 5.4x 7.0x Digital Zoom Setting*
Camera Shake Warning
Low Battery
*1 : Zoom powers reflect the combined optical and digital zoom
effects. These figures appear when the digital zoom is activated.
When a Shooting mode setting is changed, the
settings appear on the LCD monitor for about 6
p. 35, 48
seconds even if the LCD monitor is set to No
information or off. (The Shooting mode settings
p. 76
may not appear depending on the camera setting.)
p. 77
You can set the flash, red-eye reduction, macro/
p. 43, 45
infinity mode, self-timer, continuos shooting, and
p. 79
the light metering mode settings while this
information appears on the LCD monitor.
p. 80
p. 75
the chart) appear even when the information view
p. 37
is turned off.
In addition to the above, the AF frame, spot metering
p. 37
frame, recordable images or recordable movie time
p. 51
are displayed as in the example to the left.
Setting to the
p. 39 monitor on regardless of whether it is set to on or off.
A slow shutter speed has likely been selected
p. 39, 41
because of insufficient lighting if the upper
p. 42
indicator beside the viewfinder blinks orange after
p. 38
the metering preparations are complete and the
p. 83
camera shake icon (
monitor. Set the flash to
p. 53
camera to a tripod to shoot.
1
p. 44
After you take a photo by fully pressing the
p. 27
shutter button, the image displays on the LCD
p. 18
monitor for approximately three seconds (or the
review duration you set from 3 to 10 seconds). If
you press the
displayed, it will continue to display (p. 34).
and the icons in
, or
) displays in the LCD
button while the image is
Basic Functions
(the shaded area of
modes turns the LCD
or , or affix the
27