Various Functions
All procedures performed with a
connection to a USB 2.0 compliant
board are not guaranteed.
1
Install the driver and the software
applications bundled on the
Canon Digital Camera Solution
Disk (first time only).
Please see the Software Starter Guide for the
installation procedures.
2
Use the supplied interface cable
to connect the computer's USB
port to the camera's DIGITAL
terminal.
Interface cable
98
3
Set the camera's mode switch to
4
Press the ON/OFF button until the
upper indicator lights green.
USB
port
Windows
Macintosh
DIGITALTerminal
1.Open the terminal
cover with your
finger nail.
2.Insert the connector
with
facing up.
Always grasp the
connector's sides to
remove the interface
cable from the
camera's DIGITAL
terminal.
Proceed to steps 4 and 5
below.
Refer to the Software Starter
Guide and download images.
.