Connection To A Broadband Network - Panasonic SC-BTT350 Operating Instructions Manual

Connection to a broadband network

The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated (
≥ You can enjoy BD-Live (
≥ You can enjoy VIERA CAST (
∫ Using LAN (ethernet) cable
A LAN Cable (not supplied)
B Broadband router, etc.
C LAN Cable (not supplied)
D Modem (Broadband) *Provided by ISP
≥ Use shielded LAN cables when connecting to peripheral
devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
VQT2W18
16
20)
26)
33)
LAN
For details about connection method, refer to the instructions
supplied with the connected equipment.
∫
Using supplied Wireless LAN
[BTT750]
Adaptor
∫
Using optional Wireless LAN
[BTT350]
Adaptor (DY-WL10)
DC OUT
WIRELESS
A Wireless LAN Adaptor
B Wireless router (Access point), etc.
C LAN Cable (not supplied)
D Modem (Broadband) *Provided by ISP
≥ For up to date compatibility information on your Wireless
router (Access Point) refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ The unit is not compatible with public wireless LAN
services provided in airports, stations, cafes etc.
For additional information about this unit refer to
http://www.panasonic.com/consumer/support
[BTT750]
≥ Wireless LAN Adaptors other than the supplied Wireless
LAN Adaptor cannot be used.
≥ When connection conditions are poor, use the supplied
USB extension cable to connect the Wireless LAN Adaptor
provided with this unit.
≥ Do not use any other USB extension cables except the
supplied one.
[BTT350]
≥ Only the Wireless LAN Adaptor DY-WL10 (optional) can
be used.
≥ Read the operating instructions for the Wireless LAN Adaptor
DY-WL10 (optional) thoroughly when using it.
5V
500mA
LAN