Step 1 : Preparing The Speakers; Assembling The Speakers [Btt750] - Panasonic SC-BTT350 Operating Instructions Manual

STEP 1 : Preparing the speakers

Assembling the speakers
Caution
≥ Do not stand on the base. Be cautious when children are
near.
≥ When carrying speakers, hold the stand and base parts.
2 Front speakers
1
2
∫ Preventing the speakers from falling
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that
may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
≥Use a string of less than ‰ 2.0 mm (
VQT2W18
10
[BTT750]
2 Stands (with cables)
Back of the base
q)
Leave about 80 mm (3 5 /
32
q), which is capable of supporting over 10 kg (22 lbs).
3 /
32
Preparation
≥ To prevent damage or scratches, lay down a soft cloth and
perform assembly on it.
≥ For wall mount, refer to page 41.
≥ Keep the screws out of reach of children to prevent
swallowing.
2 Bases
Pull the cable
straight along
the line and
slide into the
groove.
Screw A
Insert the wire fully.
r: White
s: Blue line
Press into the groove.
Screw B
Tighten securely.
A String (not supplied)
Thread from the wall to the speaker and tie tightly.
B Rear of the speaker
C Screw eye (not supplied)
D Wall
E Approx.150 mm (5
4 Screws A 2 Screws B
A B
2
Tighten
securely.
Push!
1
q)
29 /
32