Using Button Combinations - Vizio V 2.0 Series User Manual

Using Button Combinations

There are other functions that are triggered by different button combinations on the sound bar.
Function
Factory
Reset
VIZIO TV Remote
Control
Eco Power Mode
Speaker Test
ENG - 12
Buttons are located here.
LED Behavior
Reset the sound bar to the factory default settings. To perform a Factory Reset,
All LEDs will Press and Hold the Bluetooth(
flash 3 times
Note: This will erase all settings and preferences that you have set.
Enable VIZIO
Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume
TV remote
of the sound bar. To enable/disable this function, Press and Hold the Power (
Volume Up ( + ) buttons for 5 seconds.
Disable VIZIO
TV remote
When the Eco Power mode setting is enabled, the sound bar will automatically
Enable
power down after a period of inactivity. When disabled, the sound bar will remain
Eco Power
powered on until you turn it off. To enable/disable this function, Press and Hold the
Power (
Disable
Eco Power Note: Eco Power Mode setting is OFF by default.
Press and Hold the Bluetooth( ) and Volume Up (+) buttons for 5 seconds. A
— voice will begin calling out each speaker beginning with left (left and right). If any of
these are missing, check the connection and run the speaker test function again.
—
Description
) and Volume Down (—) buttons for 5 seconds.
) and Volume Down (—) buttons for 5 seconds.
You ca
) and
Po
re
s