Using The Self-Timer - Canon PC1182 User Manual

Using the Self-Timer

Shooting Mode
You can set a 10 sec. (
time and the number of shots (
the shutter button is pressed.
1
FUNC. Menu
* Default setting.
: 2 sec. before the shutter
releases, the self-timer sound and
lamp will speed up.
: The self-timer sound will play
when the shutter button is pressed and the shutter will
release 2 sec. later.
: You can change the delay time (0 – 10, 15, 20, 30 sec.)
and number of shots (1 – 10) (p. 38). However, these
settings cannot be set for
modes.
2
Shoot.
When the shutter button is pressed fully, the self-timer lamp
will blink. When using red-eye reduction, the self-timer lamp
will blink and then stay lit for the last 2 seconds.
To Cancel the Self-Timer
Follow procedure 1 to display
) or 2 sec. (
* (Drive Mode)
See Menus and Settings (p. 22).
) delay, or a custom delay
Custom Timer), for shooting after
( , ),
.
/ / .
and
37