Huawei U8815 Maintenance Manual page 27

U8815
Maintenance Manual
5. Remove the protective film. Fix the steel holder and
the front housing according to the four points.
7. Install the PCBA, adjust the positioning hole of the
On key correctly, and connect the connector.
9. Fix according to the positioning hole, ring the three
screws, and connect to the coaxial cable.
Issue 1.0 (2012-02-13)
6. Solder the motor lead and fix the motor.
8. Install the platelet and connect the USB connector.
10. Install the speaker on the rear housing.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Assembly Procedure
18