Huawei U8815 Maintenance Manual page 23

U8815
Maintenance Manual
5. Loosen the latch between the decorating parts and
the rear housing by using the housing opener.
7. Loosen the latch between the front housing and the
rear housing by using the housing opener.
9. Loosen the latch between the platelet and the front
housing with the housing opener, and remove the
Issue 1.0 (2012-02-13)
6. Screw off the four screws on the rear housing after
removing the decorating parts.
8. Screw off the three screws on the platelet and
loosen the latch between the platelet and the coaxial
cable.
10. Loosen the camera flash according to the figure
indication, and loosen the latches between other board
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Disassembly Procedure
14