Table of Contents
Advertisement
Malfunction
Å 30
Fault code
is dis-
played in the multi-dis-
play.
The control indicator
DOOR is lit.
The control indicator FIL-
TER is lit.
The cycle is not starting.
Rust spots are visible in
the dishwashing compart-
ment.
A whistling noise can be
heard when washing dish-
es.
Possible cause
The anti-flood system has
been triggered.
The door of the dishwasher
is open.
The indicator FILTER is
there to remind you to
check the dishwasher's fil-
ters occasionally and to
clean them, if necessary. It
lights up at regular inter-
vals, regardless of how
clean the filters are.
The mains plug is not
plugged in.
A fuse in the house's wiring
system is defective.
For dishwasher models with
a delay start timer:
A start time has been se-
lected.
The dishwashing compart-
ment is made from rust-
free stainless steel. Rust
spots in the dishwashing
compartment are due to
rust particles from external
sources (rust particles from
water pipes, pans, cutlery,
etc.). Remove such spots
with a commercially-avail-
able cleaning product for
stainless steel.
The whistling is not a cause
for concern.
Remedy
First shut off the water tap,
then switch off the appli-
ance and contact the Cus-
tomer Care Department.
Close the dishwasher door.
The indicator goes out auto-
matically at the start of the
next dishwashing cycle.
Plug in the mains plug.
Replace the fuse.
If the dishes are to be
washed immediately, cancel
the delay start.
Only wash cutlery, dishes
and pans that are suitable
for dishwasher use.
Decalcify appliance with
commercially available
agents for cleaning dish-
washers.
If the noises can still be
heard after decalcifying the
machine, use a different
brand of detergent for
washing cutlery and dishes.
31
Hide quick links:
Advertisement
Table of Contents
