Table of Contents
Advertisement
Troubleshooting guide
iPod operation
Cannot charge or operate.
Cannot display iPod photos/
videos on the TV.
HDMI or progressive video
There is ghosting when HDMI or
progressive output is on.
Pictures not in progressive
output.
Closed captions not displayed.
Radio
Distorted sound or noise is heard.
"ST" flickers or does not light.
A beat sound is heard.
A low hum is heard during AM
broadcasts.
TV displays
"/"
"THIS DISC MAY NOT BE PLAYED
IN YOUR REGION."
34
≥ Check that the iPod is connected firmly.
≥ The battery of the iPod is depleted. Charge the iPod, and then operate again.
≥ Ensure the video connection to the VIDEO OUT terminal on this unit.
≥ Operate the iPod menu to make the appropriate photo/video output settings for your TV. (Refer to
operating instructions for your iPod.)
≥ This problem is caused by the editing method or material used on DVD-Video, but should be
corrected if you use interlaced output. When using the HDMI AV OUT terminal, set "VIDEO
FORMAT" in Menu 4 to "480i". Or, disable the HDMI AV OUT connection and use other video
connections.
≥ When using the COMPONENT VIDEO OUT terminal, set "VIDEO OUT (I/P)" in "VIDEO" menu to
"INTERLACE". (Alternatively, press and hold [CANCEL] until "PRG" disappears from the main unit
display.)
≥ Select "PROGRESSIVE" in "VIDEO OUT (I/P)" in "VIDEO" menu.
≥ The unit's VIDEO OUT terminal outputs the interlaced signal even if "PRG" is displayed.
≥ When HDMI or progressive output is on, closed captions will not be displayed.
≥ Adjust the position of the FM or AM antenna.
≥ Use an outdoor antenna.
≥ Turn the TV off or move it away from the unit.
≥ Separate the antenna from other cables.
≥ The operation is prohibited by the unit or disc.
≥ Only DVD-Video discs that include or have the same region number as the one on the rear panel of
this unit can be played.
28
—
7
—
19
21
21
—
—
—
9
—
—
—
Cover
page
Hide quick links:
Advertisement
Table of Contents
