Step 5 Setting Up The Network; This Unit's Network Setting - Panasonic DMR-E500HS Operating Instructions Manual

5
STEP Setting up the Network
Numbered
buttons
¢ CANCEL
: 9
SUB MENU
SETUP

This unit's network setting

Preparation
≥Connect this unit to the Home Network. This can be directly to
another network compatible Panasonic DVD recorder
( page 10).
≥Check the computer's IP address setting (
connecting this unit and a computer when the DHCP on the
router is disabled.
1
Press [SETUP].
2
Press [3, 4] to select "Network" and
press [1].
3
Press [3, 4] to select "Network
Function" and press [ENTER].
4
Press [3, 4] to select "Enable" and
press [ENTER].
SETUP
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
Network
RQT7394
16
DVD POWER
TV
POWER
VOLUME
CH
INPUT SELECT TV/VIDEO
HDD DVD SD/PC
PAGE
1 2 3
CH
4 5 6
AUDIO
7 8 9
VCR Plus+
CANCEL
CM SKIP
0
SKIP SLOW/SEARCH
STOP PAUSE PLAY/x1.3
DIRECT NAVIGATOR FUNCTIONS
TOP MENU
3 4 2 1
ENTER
ENTER
SUB MENU RETURN
RETURN
PROG/CHECK TV GUIDE
DISPLAY TIME SLIP
SETUP ERASE REC MODE REC
Info DUBBING CHAPTER STATUS
page 18), if
Network Function
Enable
Disable
MAC Address : 00-08-97-24-01-C4
Unit ID : 4284 1491 6862 6641
Status : 0000-0000-20LU-3DDE
3900-0V03-0M52-0L00
Password : No password
5
Press [3, 4] to select "TCP/IP
Settings" and press [ENTER].
6
Press [3, 4] to select "Automatic
(DHCP)" and press [ENTER].
When connecting a computer via a router with its DHCP
disabled
Press [3, 4] to select "Manual" and press [ENTER]
( page 19, To manually enter the DVD recorder's IP
Address).
SETUP TCP / IP Settings
Automatic (DHCP)
Channel
Set Up
IP Address
Disc
Subnet Mask
Video
Default Gateway
DNS Server
Audio
Display
TV Screen
Network
≥IP Address : Make a note of this IP address. You will
need it when operating this unit from the
computer.
7
Confirm that a connection has been
established.
Previous
Audio
Now connecting.
Display
It may take a few minutes.
TV Screen
Network
Wait until the display changes (this may take a few minutes).
≥"Now connected to the network." is displayed if the
connection has been correctly established.
≥"Cannot connect to the network." is displayed if the
connection has failed. Check the LAN cable connection.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
[Note]
While "Now updating the settings. Please wait for a while." is
displayed, no operations will be accepted by this unit. Wait about 5
seconds until the highlights appear again.
∫ To change unit names
When more than one network compatible Panasonic DVD recorder
is connected on the Home Network, you need to give each a
unique unit name so that they can be distinguished.
(Factory preset: "DVD Recorder")
After step 2 ( left)
1 Press [3, 4] to select "Unit Name Setting" and press [ENTER].
2 Enter the name ( page 46).
Manual
: 192. 168. 0. 14
: 255. 255. 255. 0
: 192. 168. 0. 1
: 192. 168. 0. 1
01/01 Next