Scheduled Recording
Refer to "Advanced Scheduled Recording" (
scheduled recording.
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (example: AV input, etc.).
When using the set top box, make sure the set top box is turned on.
[RAM] If the disc is protected, release protection (
[VHS] Ensure accidental erasure tab is intact.
Insert a disc or VHS cassette with enough remaining blank space.
Confirm that the clock on the unit's display is set to the correct time.
, to select "New Scheduled Recording",
then
OK
, to move through the items and , to
set the items.
Channel/Input
Date/Frequency – You can set a daily or weekly program.
On (start time) / Off (end time)
Drive
Mode
Name (only for discs)
To delete all items
1. Press [SUB MENU].
2. Press [, ] to select "Delete", then press [OK].
OK
− Repeat steps 2−4 to program other recordings.
DVD/VHS
POWER
when you have fi nished programming.
− "" lights on the unit's display.
− Scheduled recording can be started only when the
unit is turned off.
25) for detailed information on
– TV Station/External Input
When the set top box is controlled with this unit:
Press the numbered buttons to set the channel.
To enter a channel using the keypad:
1. Press [SUB MENU].
2. Press [, ] to select "Show Keypad", then press [OK].
3. Press [, , , ] to select a character, then press
[OK].
4. Press [ STOP] when you've fi nished entering text.
To preview the channel for scheduled recording:
1. Press [SUB MENU].
2. Press [, ] to select "IR Test", then press [OK].
When the set top box is not controlled with this unit:
Select the input to which the set top box is connected and
set a channel on connected equipment before scheduled
recording starts.
– Hold button to change in 30-minute increments.
– DVD or VHS
– Recording mode, see page 22
– Press [OK], see
page 37.
Preview of selected
channel
47).
Schedule List
Remaining Recording Time
VHS
2:00 SP
DVD
0:33 XP
5/ 4 Fri
6:11 PM
No
Channel
Date
On
Off
Drive
Mode
Check
New Scheduled Recording
SCHEDULED
Remaining Recording Time
VHS
2:00 SP
DVD
0:33 XP
RECORDING
5/ 4 Fri
6:11 PM
Date/
Channel/
On
Off
Drive
Mode
Frequency
Input
4-1
:
:
Name
Set Channel/Input.
To input from the keypad,
please press SUB MENU.
OK
SUB MENU
Cancel
Number
DVD/VHS
POWER
POWER
VOL
DRIVE
CH
TV/VIDEO
SELECT
TRACKING/V-LOCK
1
2
3
CH
4
5
6
INPUT SELECT
9
7
8
DELETE
0
CANCEL
RESET
SLOW/SEARCH
SKIP/INDEX
REW
FF
STOP
PAUSE
PLAY
TIME SLIP /
CM SKIP
/
JET REW
ENTER
OK
SUB MENU
RETURN
CREATE
AUDIO
DISPLAY
SETUP
CHAPTER
Tips
Icons such as " [RAM] " indicate usable
discs. Refer to pages 66 and 67.
Notes
To prevent recording errors:
Set a scheduled recording period slightly
longer than the actual program (to make
sure the program is recorded in full).
Be sure to perform step 5 before the
scheduled recording time. When the
unit is turned off, "" lights on the
unit's display to indicate scheduled
recording standby has been activated.
"" fl ashes when the unit cannot go to
scheduled recording standby. (e.g., a
recordable disc is not in the disc tray)
It does not fl ash if Quick Start is off.
When scheduled recordings are set
to start one immediately after another,
the unit cannot record the beginning
of the later program.
If two scheduled recording times overlap,
the recording that started fi rst always has
priority. The second recording will start
only after the fi rst recording has fi nished.
Scheduled recording cannot be
executed on both DVD and VHS
drives at the same time.
When starting time for a scheduled
recording is the same, the recording
that you programmed later has priority.
Depending on the Daylight Savings
Time (DST) settings for this unit,
scheduled recordings may be
affected when the seasons change.
17
RQT9058