Program Out Connection - Panasonic CT-27HL15 Operating Instructions Manual

O E
PTIONAL QUIPMENT
Program Out Connection (PROG OUT)
To use the television audio and video with optional equipment,
connect the PROG OUT and TO AUDIO AMP connections on the
back of the television.
Note: If the Main Picture signal is HDMI or Component Video
Input, no Program out signal will be available.
TERMINALS ON BACK OF TELEVISION
COMPONENT
1 2
VIDEO INPUT
HDMI
AV IN
Y
S-VIDEO
VIDEO
P
B
INPUT PROG
OUT
P
R
L
ANT
AUDIO
IN
R
1 2 3
Note: Rear A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 3 for your
model capabilities.
Procedure
• Connect optional equipment to PROG OUT and TO
AUDIO AMP terminals.
• PROG OUT terminal display is the same as on-screen
display.
• See optional equipment manual for further instructions
for recording and monitoring.
HDMI (High Definition Multimedia Interface)
input connection
Note: HDMI input is not available in model CT-27HC15.
About HDMI
HDMI is the first all digital consumer electronics A/V
interface that supports several uncompressed standards,
enhanced and high definition video formats as well as
existing multi-channel audio format. One jack supports both
video and audio information. The HDMI/HDCP
be connected to an EIA/CEA 861
electronic device, such as a set top box or DVD player
equipped with an HDMI or DVI output connection. By
inputting a High-bandwidth Digital Content Protection
(HDCP) high definition picture source to the HDMI terminal
of this TV, high definition pictures can be displayed on the
screen in their digital form. The HDMI input terminal is not
intended to be used with personal computers. This TV is
compatible with 1080i, 480p and 480i formats. Select the
output of the connecting device to match that of the TV.
Notes:
1. HDMI/HDCP = High Definition Multimedia Interface /
High-Bandwidth Digital Copy Protection.
2. EIA/CEA-861 Profiles compliance covers profiles for
transmission of uncompressed digital video including
high bandwidth digital content protection.
8
C
ONNECTIONS
Monitor
VIDEO
L
or
TO AUDIO
AMP
R
CABLES NOT INCLUDED
1
input can
2
compliant consumer
Compatible formats
This TV is compatible with the following formats. Please
set the connecting device to the following format.
Video signal
Format
1080i
480p
VCR
480i
PLAY
R
E W FF
STOP
Audio signal
When digital audio is included in the HDMI connection,
the compatible sampling frequencies are 48 KHz /
44.1KHz / 32 KHz.
Connection diagram
Follow the diagram below to connect the TV to a set top box or a
DVD player.
HDMI
AV IN
ANT
Incoming
Cable
CABLES NOT INCLUDED
Note: Use analog audio when
digital audio is not available
* The HDMI connector on this television is Type A.
Procedure
• Connect the HDMI output from the set top box or a DVD
player to the HDMI input on the back of the TV.
• Press TV/VIDEO button on the remote control to select
HDMI input. The interface on the TV is an HDMI Type A
connector.
• If the external device has a DVI output only, use a DVI to
HDMI adaptor cable*
the TV. Also, connect the Audio Out signal from the
external device (set top box or DVD player) to the Audio
4
In* jacks below the HDMI input.
• If you cannot display the picture because your Digital Set
Top Box does not have a Digital Out terminal setting, use
the Component Video Input (or the S-Video Input or
Video Input). In this case, the picture will be displayed as
an analog signal.
Notes:
*3. HDMI-DVI conversion cable (TY-SCH03DH) available
on Panasonic Website: www.panasonic.com (only
for USA customers).
*4. Please refer to pages 10 and 11 for Audio setting detail.
Vertical scanning
No. of dots
frequency (Hz)
1920 x 1080i 59.94 / 60
720 x 480p 59.94 / 60
640 x 480p 59.94 / 60
720 x 480i 59.94 / 60
TERMINALS ON BACK OF TELEVISION
COMPONENT
VIDEO INPUT 1 2
Y
S-VIDEO
VIDEO
P
B
INPUT
PROG
OUT
P
R
L
AUDIO
IN
R
1 2 3
L
AUDIO
OUT
R
EXTERNAL DIGITAL
COMPONENT
3
to connect to the HDMI jack on
VIDEO
L
TO AUDIO
AMP
R
HDMI
OUT