Table of Contents
Advertisement
1. Press [MENU]
2. Enter the four-digit lock code and press [OK].
The default lock code is commonly the last 4 digits of your phone number.
3. Press [1] Lock Phone.
4. Use Up/Down Navi Key to select an option, then press [OK].
Unlock The phone is never locked (Lock mode can be used).
Lock The phone is always locked. When locked, you can receive incoming calls and
make only emergency calls.
On Power Up The phone is locked when it is turned on.
9.3.2
Restrictions
Allows you to restrict Calls, Messaging or Data.
1. Press [MENU]
2. Enter the four-digit lock code and press [OK].
3. Press [2] Restrictions and enter the four digit code.
4. Use to select between Incoming Calls/ Outgoing Calls/ Incoming Messages/
Outgoing Messages/ Data, then press [OK].
9.3.3
Change Lock Code
Allows you to enter a new four-digit lock code.
1. Press [MENU]
2. Enter the four-digit lock code and press [OK].
3. Press [3] Change Lock Code and select Phone Only/ Call & Applications.
4. Enter a new 4-digit lock code and press [OK].
5. For confirmation, it will ask you to enter the new lock code again.
9.3.4
Reset Default
Allows you to reset your phone to factory default setting except prepaid-related
parameters.
1. Press [MENU]
2. Enter the four-digit lock code and press [OK].
3. Press [4] Reset Default and press [OK].
4. Read the displayed message and press [OK] to continue.
5. A message will pop up that says "Preference settings will be set to factory
defaults. Press <OK> to continue." Press [OK].
6. Use Up/Down Navi Key to highlight an option (below) and press [OK].
Revert/ Cancel.
9.4 Call Settings
The Call Settings menu allows you to designate how the phone handles both
incoming and outgoing calls.
9.4.1
Answer options
Allows you to determine how to handle an incoming call.
1. Press [MENU]
2. Use Up/Down Navi Key to select a setting (from below), then press [OK].
Flip Open/ Any Key/ Send Key Only/ Auto Answer
9
3
9
3.
9
3.
9
3.
9
4
1.
Advertisement
Table of Contents
