Table of Contents
Advertisement
9.5 Bluetooth
9.5.1
Paired Devices
Pairing is the process that allows the handset to locate, establish and register 1-to-
1 connection with the target device.
For pairing new Bluetooth
1. Press [MENU]
2. Follow the Bluetooth
3. Press Left Soft Key Search.
4. If Bluetooth
®
power is set to off, you will be prompted to turn power on. Highlight
Yes and press [OK].
5. Choose to conduct a New Search or to bring up the results of the Last Search (if
applicable).
6. The device will appear in the Found Devices menu once it has been located.
Highlight the device and press [OK].
7. The handset will prompt you for the passkey.
Consult the Bluetooth
0000 - 4 zeroes). Enter the passkey and press [OK].
8. Once pairing is successful, select between Always Ask/ Always Connect.
9. Once connected, you will see the device listed in the Paired Devices menu.
9.5.2
Power
Allows you to set the power On/Off.
1. Press [MENU]
2. Use Up/Down Navi Key to select a setting, then press [OK].
On/ Off
Note
By default, your device's Bluetooth
9.5.3
My Visibility
Allows you to set the visibility of your Bluetooth
1. Press [MENU]
2. Use Up/Down Navi Key to select a setting, then press [OK].
Visible/ Hidden
Note
If you turn on My Visibility, your device is able to be searched by other in-range
Bluetooth
®
devices.
9.5.4
My Bluetooth Name
Allows you to edit the name of the Bluetooth
1. Press [MENU]
2. Hold down [BACK] to clear the existing name.
3. Use the alphanumeric keypad to enter a new alias.
4. Press [OK] to save and exit, or Right Soft Key Cancel to cancel editing.
9.5.5
My Bluetooth Info
Allows you to view the information of the Bluetooth
1. Press [MENU]
®
device
9
5
1.
®
accessory instructions to set the device to pairing mode.
®
accessory instructions for the appropriate passkey (typically
9
5
2.
®
functionality is turned off.
9
5
3.
9
5
4.
9
5
5.
®
device.
®
device.
®
function.
Advertisement
Table of Contents
