Table of Contents
Advertisement
Connection
Connecting to a DVD
* The output jacks (Y, P
, P
) of the DVD might be labeled as Y, Pb, Pr / Y, B-Y, R-Y / Y, Cb, Cr according to the equipment.
B
R
< How to connect >
a. Connect the DVD Component cable to the RCA to D-Sub
Adapter and then connect the RCA to D-Sub Adapter to
RGB IN-1 of the projector.
* When connecting the component cable, match the jack colors
with the component cable.(Y=green, P
* You can also connect to the RGB IN-2 port.
Component
Signal
O
480i
O
480p
O
720p
1080i
O
O
576i
O
576p
Connecting to a D-TV Set-Top Box
* To receive D-TV programmes, it is necessary to purchase a D-TV receiver (Set-Top Box) and connect it to the projector.
* Please refer to the owner's manual of the D-TV Set-Top Box for the connection between projector and D-TV Set-Top Box.
< How to connect a HDMI source >
a. Connect the HDMI IN terminal of the projector to the HDMI
output terminal of the D-TV Set-Top Box via HDMI cable.
b. Use a DTV receiver with DTV 480p(576p)/720p/1080i
mode.
*
No support of audio.
< How to connect a Component source >
a. Connect the D-TV Set-Top Box Component cable to the
RCA to D-Sub Adapter and then connect the RCA to
D-Sub Adapter to RGB IN of the projector.
* When connecting the component cable, match the jack colors
with the component cable.(Y=green, P
* You can also connect to the RGB IN-2 port.
*
No support of audio.
19
=blue, P
=red)
B
R
=blue, P
=red)
B
R
Component cable
HDMI Cable
<D-TV Set-Top Box>
Component cable
<D-TV Set-Top Box>
Advertisement
Table of Contents
