Table of Contents
Advertisement
en Installation and connection
Remove the foam tray under the
2.
appliance.
Remove the foam block.
3.
Fit the bottom cover (which you
4.
can find in the drum). Press the
bottom cover fully into the holes in
the base plate.
Note: If necessary, secure the bot-
tom cover with screws.
14
4.5 Removing the transit
bolts
The appliance is secured for trans-
portation using transit bolts on the
rear of the appliance.
Note: Keep the transit bolt screws
and the sleeves in a safe place for fu-
ture transport → Page 46.
Pull the hoses out of the holders.
1.
Unscrew
and remove
2.
screws for the 4 transit bolts with a
WAF 13 wrench.
all
Advertisement
Table of Contents
