1. Manuals
  2. Brands
  3. NatComm Manuals
  4. Telephone System
  5. SLS 1
  6. User manual

NatComm SLS 1 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SLS 1
USER GUIDE
For Technical Assistance
Please Phone: (07) 5596 5128

Advertisement

Table of Contents
loading

Related Manuals for NatComm SLS 1

Summary of Contents for NatComm SLS 1

  • Page 1 SLS 1 USER GUIDE For Technical Assistance Please Phone: (07) 5596 5128...
  • Page 2 Page 2 National Communications...

  • Page 3: Product Description

    PRODUCT DESCRIPTION Our unique SLS1 Single Line Message On Hold System is specifically designed to provide a COMPLETE MESSAGE ON HOLD solution for users of single telephone lines. It will : 1) Allow you to place your telephone calls ON HOLD from any telephone on your line.
  • Page 4 ALTERNATIVE MODELS There are 3 separate models within the SLS family, all allowing the User to place calls ON HOLD or retrieve calls ON HOLD, from any telephone connected to their single telephone line. 1) Model SLS1 This is the base model in the range and it is designed to provide a Message On Hold capability for ANY Single Telephone Line business.

  • Page 5: Operating Procedure

    OPERATING PROCEDURE TO PLACE A CALL ON HOLD Press 2 and Hang Up To place any call ON HOLD, simply press 2 on any telephone on your line and then HANG UP your telephone. If you are using a Cordless Phone, then you may need to press End or press the key that you use to ‘Hang Up’...

  • Page 6: Flash Cards

    FLASH CARDS SLS1, uses a standard SD Flash Card to store it’s MP3 based messages. Currently a 2GB SD Flash Card is supplied with this unit. SD Flash Cards are completely non volatile, which means that your message is not lost in transport or when power is lost. The Flash Card can be overwritten many times, without any deterioration in quality.
  • Page 7 MP3 BASED MESSAGES Messages used with SLS1 must be prepared in MP3 format. You can load 1 or More separate ON HOLD messages onto the Flash Card and SLS1 will play each message, one after the other, before starting again with the first message when all files have played. There is no time delay between messages.
  • Page 8 Page 8 National Communications...
  • Page 9 SINGLE LINE INSTALLATION Refer to Diagram on Page 8 1) TELEPHONE LINE CONNECTION Connect the LINE IN port of SLS1 direct to ANY TELEPHONE SOCKET on your line, using the supplied cable fitted with a male plug. 2) TELEPHONE CONNECTION Connect one or more telephone(s) to the LINE OUT port of SLS1 using the supplied cable.
  • Page 10 RING BACK REMINDER RING SLS1 will generate a RINGBACK REMINDER ring, every 15 seconds to remind you that you have a call on hold. This brief RINGBACK REMINDER ring is generated internally and will RING all telephone(s) connected direct to the LINE OUT port of this unit..

  • Page 11: User Programming

    USER PROGRAMMING In most cases the DEFAULT SETTINGS of this device will be suitable for your requirements and programming will not be necessary. However, You can change the frequency of the reminder ring back ring, the delay before the first ring commences and the total number of reminder rings that SLS1 will output.
  • Page 12 USER PROGRAM FUNCTIONS FIRST REMINDER RING DELAY TIME Whenever you place a Call On Hold, SLS1 can output a REMINDER RING to remind you that you have a call on hold. You can set the DELAY TIME before it generates its first REMINDER RING. Allowable Range 01 –...

  • Page 13: Programming Notes

    PROGRAMMING NOTES The procedure for User Parameter Programming is described on pages 14 - 15. You must temporarily connect a standard analogue telephone to the SLS1 Line Out port, as Program Changes are made by using ‘touch tone’ keys The following notes provide important information about the programming procedure : 1) To enter PROGRAMMING MODE you must turn OFF POWER to your unit and then switch POWER ON AGAIN.

  • Page 14: Programming Procedure

    PROGRAMMING PROCEDURE TURN OFF POWER TO YOUR UNIT SWITCH ON POWER AND PRESS # (WITHIN 30 SECONDS) You must use a telephone connected to the SLS-1 Line Out port. YOUR UNIT WILL OUTPUT 3 SHORT ‘BEEPS’ Do not proceed until you have heard 3 short beeps. If you do not hear 3 beeps, return to the start (A).
  • Page 15 PROGRAMMING PROCEDURE MAXIMUM ON HOLD TIME To enter the MAX CALL TIME press #4xx xx = time limit in minutes, can be 01-99, or 00 = Off Max On Hold Time of 05 min, press #405 (Default) Max On Hold Time of 02 min, press #402 Max On Hold Time = OFF, press #400 Please wait for confirmation beep before proceeding.

  • Page 16: Specifications

    SPECIFICATIONS Dimensions 165w x 150d x 60h mm Weight 415g Power Supply 240VAC to 12VAC/500mA Power Consumption Idle - 100mA Ringing - 230mA Ringer Equivalence 0.3 REN Connectors RJ 11 6 pin (2 centre) 2.5mm barrel connector ACMA COMPLIANT Supplier Nunber N782 WARRANTY This device is guaranteed against defects from workmanship for a period of two years (24 months) from the date of purchase.

Table of Contents