Setting The Film Winding Mode; Setting The Shooting Mode - Canon EOS 620-650 User Manual

3) Turn the electronic input dial to select either
"ONE SHOT" or "SERVO"

3. Setting the Film Winding Mode

This camera has two automatic film winding modes.
S: Single exposure. The film automatically advances to the next frame upon shutter release.
C: Continuous exposure. Keep pressing the shutter button and the film winds continuously at the maximum
speed of approximately three frames per second.
**image missing: Self-timer position. (see p. 58)
2) Turn the electronic input dial to set either "S" or "C" in the display panel.

4. Setting the Shooting Mode

To set the shooting mode, press the shooting mode
selector while turning the electronic input dial until the
desired mode appears. (The display moves in the
following cycle.)
· Once the shutter button is pressed halfway, the
display will be held on for approximately eight seconds.
To clear this status within eight seconds, press the
shooting mode selector.
AF can be done with the Canon Circular Polarizing Filter
PL-C. When using a linear polarizing filter, use manual
focusing. (see p.56)
To set the film winding mode, follow these steps:
1) Open the switch cover and press the blue film winding mode
selector.
· The display will be held on for approximately eight seconds so you
can remove your finger. To clear this status within eight seconds,
press the shooting mode selector.