Fujitsu ScanSnap FI-5110C Operator's Manual page 43

CONTENTS CONTENTS
INTRODUCTION
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
2.1 Turning the scanner ON
2.2 Loading Documents on the ADF for
Scanning
2.3 Scanning Documents
2.4 How to Use the Scanner Driver
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
2.4 How to Use the Scanner Driver(12)
2. Configuration Window of FUJITSU ISIS Scanner Driver
Image Mode
Select a color mode suitable for the purpose from the menu.
Black & White
16-level Grayscale
256-level Grayscale
24-bit Color
Image Processing
Resolution
Specifies the number of pixels (dots) per inch.
Select a fixed resolution from the list or enter any value (from 50 to 600) manually.
A higher resolution produces finer image, but requires much more memory.
10 11 13 14 15
12
Scans data in binary (black and white).
Distinguishes black from white according
to the fixed threshold. This scanning
mode is suitable for scanning line
drawings and text documents.
Scans data by 14 shades of gray plus
black and white. This mode uses 4 bits
per pixel.
Scans data by 254 shades of gray plus
black and white. This mode uses 8 bits
per pixel. This mode is switable for
scanning monochrome photographs.
Scans data as full-colored image using
24 bits per pixel. This mode is suitable
for scanning color photographs.
Binary processing is applied to the
scanned images This mode is available
only when Image Processing Software
Option (separately sold) is installed.
Please refer to the "User's Guide of
Image Processing Software Option" for
details.
10 11 13 14 15
12
16
16