Fujitsu ScanSnap FI-5110C Operator's Manual page 111

CONTENTS CONTENTS
INTRODUCTION
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing Jammed Documents
6.2 Error Indications in the Operator Panel
6.3 Remedying Typical Troubles
6.4 Items to Check Before Contacting the Agent
Where You Bought the Scanner
6.5 Checking Labels on the Scanner
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
Symptom 10 : Pickup errors occur frequently.
Back
Do the documents satisfy the
conditions described on "7.2 Document
Quality"?
Yes
Was the document fanned before
loading on ADF paper chute?
Yes
Are all the consumables (Pick roller
and Pad ASSY) installed correctly?
Yes
Is any of consumables (Pick roller, Pad
ASSY) dirty?
No
Is any of consumables (Pick roller and
Pad ASSY) worn out? (Check the
consumable counter)
No
If you cannot solve the problem after
taking measures, check the items in
"6.4 Items to Check Before Contacting
the Agent Where You Bought the
Scanner" and contact the dealer or an
authorized FUJITSU service provider.
Use documents that satisfy the
requirements.
For details on requirements, see
No
Document Quality".
Fan the document before loading, or
reduce the number of sheets of the
document.
No
Correctly install the consumable(Pick
roller and Pad ASSY), if needed.
For details on how to install the
consumables, see "5 REPLACING
No
CONSUMABLES".
Clean the dirty consumable.
For details on how to clean the
consumables, see "4 DAILY
Yes
Replace the consumable, if needed.
For details on how to replace the
consumables, see "5 REPLACING
Yes
CONSUMABLES".
"7.2
CARE".