Before First Use; Daily Use - AEG L6TDN642G User Manual

20 www.aeg.com

10. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is residual water left in
the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Connect the mains plug to the mains
socket.

11. DAILY USE

11.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press button On/Off
the appliance.
A short tune sounds.
11.2 Loading the laundry
1. Open the appliance lid.
2. Push the button A.
The drum opens automatically.
2. Open the water tap.
3. Put 2 litre of water in the detergent
This activates the drain system.
4. Put a small quantity of detergent in
5. Set and start a programme for cotton
This removes all possible dirt from the
drum and the tub.
3. Put the laundry in the drum, one item
4. Shake the items before you put them
Make sure not to put too much laundry in
the drum.
to activate
5. Close the drum and the lid.
11.3 Detergent
compartments. Using
detergent and additives
A
1. Measure out specified detergents for
washing machine the detergent and the
fabric conditioner.
2. Put the detergent and the fabric
conditioner into the proper
compartments.
compartment for washing phase.
the compartment for washing phase.
at the highest temperature without
laundry.
at a time.
in the appliance.
CAUTION!
Before you close the lid of
your appliance, make sure
that you close the drum
correctly.
Always obey the instructions
that you find on the
packaging of the detergent
products.