Maintenance; Cleaning The Adf - Fujitsu ScanPartner 15C User Manual

Image scanner

Hide thumbs Also See for ScanPartner 15C:

Table of Contents

3. MAINTENANCE

Your Scanner is designed to be maintenance free. However, it still needs to

be cleaned occasionally to ensure optimum image quality and performance.

From time to time the pad assembly and feeding rollers may become

contaminated with ink, toner particles or paper dust. In this case the

scanner may not feed documents smoothly or several documents may feed

at once. If this occurs please follow the cleaning procedures to return your

Scanner to its original state.

The cleaning procedures (Figure 3-1)

i).

Moisten a cotton swab with isoprophyl alcohol (95%). (Cleaner kits

are available from Fujitsu.)

ii).

Open the ADF unit by depressing the button

unit, carefully open the ADF to the left

moving the swab from side to side. Rotate the rollers forward with

your finger and repeat the above cleaning procedures until the rollers

are clean. Be careful not to snag or damage the pick springs.

iii). Wipe the pad in the direction from top to bottom. Be careful not to

hook the pick springs.

iv). Close the ADF unit. Your Scanner is now ready for use.

1) Documents do not feed smoothly or easily;

2) Several documents feed at one time.

in front of the ADF

. Wipe the feeding rollers by

3-1

Table of Contents