Batteries; Main Battery Pack - Honeywell Dolphin 99EXLF User Manual

®
• 409 Glass and Surface Cleaner
®
• Clorox Bleach (10%)
®
• Windex Blue
• Gentle dish soap and water
•
Note: The use of cleaning solutions containing bleach may cause the overmold on the housing to discolor.

Batteries

There are three types of battery power: the main battery pack installed in the back panel, the backup
battery located inside the terminal and the Real Time Clock (RTC) battery located inside the terminal.
They are designed to work together to prevent data loss when the terminal is in use over long periods.
All batteries must be completely charged before using a Dolphin terminal for the first time!
Note: The RTC battery will preserve the Real Time Clock 60 days after the main battery and internal backup battery
are fully depleted.

Main Battery Pack

We recommend use of Honeywell Li-ion or Li-poly battery packs. Use of any non-Honeywell battery may result
in damage not covered by the warranty.
•
Dolphin 99EX and 99GX model terminals are designed for use with standard battery pack model
99EX-BTSC (Li-poly 3.7V, 11.3 watt hour) and extended battery pack model 99EX-BTEC (Li-ion 3.7V,
18.5 watt hour) manufactured for Honeywell International Inc. The standard or extended battery pack is
the primary power source for the terminal. The Li-poly and Li-ion battery packs are designed to operate
in a temperature range of -10° to 50°C (14° to 122°F).
CAUTION - Read the
markings on the battery, charging peripheral, or device using the battery before attempting to install, use, or
charge the battery. Risk of fire and burns if improperly handled. Do not open, crush, heat above 60°C
°
(140 F), or incinerate.
When the main battery pack is installed in the terminal, use one of the following peripherals:
• Dolphin 99EX HomeBase Device (Model 99EX-HB)
• Dolphin 99EX eBase Device (Model 99EX-EHB)
• Dolphin 99EX Mobile Base Device (Model 99EX-MB)
• Dolphin 99EX ChargeBase Device (Model 99EX-CB)
• Dolphin 99EX Net Base Device (Model 99EX-NB)
When the main battery pack is not installed in the terminal:
• Place the battery pack in the
• Place the battery pack in the
99EX-HB) (see page 12-2) or
For information on how to remove the main battery pack from the terminal, see
Battery Pack on page
Charging Time
The standard 3.7V Li-poly battery pack requires 4 hours to charge completely before initial use. The
extended 3.7V Li-ion battery pack requires 6 hours to charge completely before initial use.
Honeywell recommends charging the Dolphin terminal for at least 24 hours prior to initial use to ensure
the internal backup battery is fully charged.
Guidelines for Battery Pack Use and Disposal
Dolphin 99EX QuadCharger Device (Model 99EX-QC)
Auxiliary Battery Well
Dolphin 99EX eBase Device (Model 99EX-EHB)
2-4.
on page
(see page 12-1)
(see page 13-1)
(see page 14-1)
(see page 15-1)
(see page 16-1)
of the Dolphin 99EX HomeBase Device (Model
3-14
and all cautionary
(see page 17-1)
(see page 13-1).
Replacing the Main
3 - 13