Special Maintenance - Smeg C36GGRU Manual

9. SPECIAL MAINTENANCE

The oven may require special maintenance or replacement of parts subject to wear such as gaskets,
bulbs, etc. The following instructions describe how to perform these minor maintenance operations.
ELECTRICAL SHOCK HAZARD
WARNING
Before servicing, disconnect the appliance from the power supply.
9.1 Removing the door
Open the door completely.
Insert a pin in the hole in the
hinge. Repeat this operation on
both hinges.
9.2 Replacing the oven light bulb
1 Completely remove all accessories from inside the
oven.
2 Remove the racks/trays support frames.
3 Remove the bulb cover using a tool (e.g. a
screwdriver).
Incandescent lamps:
4 Unscrew and remove the lamp.
5 Replace the lamp with one of the same type (25W).
6 Replace the cover correctly, so that the moulded part of the glass is facing
the door.
7 Press the cover completely down so that it attaches perfectly to the bulb
support.
Instructions for the user
Grasp the door on both sides
with both hands, lift it forming an
angle of about 30° and remove it.
To reassemble the door, put the
hinges in the relevant slots in the
oven, making sure that grooved
sections A are resting completely
at the bottom of the slots. Lower
the door and once it is in place
remove the pins from the holes in
the hinges.
25