NOTES
NOTES
• Remove paper clips and staples. Flatten the staple holes.
• A preliminary document feed test may be necessary to avoid unexpected errors. If document
slip or jam in the ADF (JAM error) or double feed occurs frequently, read the documents
manually using the Document bed.
The following documents may be difficult to read properly using the ADF:
-
Paper with clips or staples.
-
Paper written on with wet ink.
-
Paper of uneven thickness (for example, envelopes).
-
Paper with large rumples or curls.
-
Paper with folds or tears.
-
Tracing paper.
-
Coated paper.
-
Carbon paper.
-
Paper smaller than A8 (vertical)
-
Paper larger than letter size in width (216 mm) or legal size in length (356 mm)
-
Materials other than paper (for example, clothes, metal foil, or OHP film).
-
Light-sensitive paper.
-
Paper which has perforations and drilling in an end.
-
Non-rectangular paper.
-
Very thin paper.
• Set documents on the ADF so that the curl of the leading edge does not exceed the
measures shown below.
• To avoid skewing, do not feed documents of different widths during the same batch.
G
4-13