Canon D I G I T A L C A M E R A CDI-E019-010 Software Starter Manual page 105

RAW Image Parameter Settings Dialog
Click this and a white point of the
image in the Preview Area to set it
as the value for the white balance.
Parameter setting selections are
reflected in the preview image.
Placing a check here applies linear processing to the contrast, sharpness and color saturation,
and allows the images to be edited with photo retouching software, such as Adobe
Photoshop.
• The [Linear] option is only enabled when [TIFF 16 bits/channel] is selected as the file format.
Selecting and Adjusting the Attributes of Multiple RAW Images
Ensure that all images included in a multiple selection of RAW images are from the
same camera before attempting to adjust the image attributes. The white balance
will not adjust properly if images from different cameras are mixed and the [Manual]
white balance option is selected in the RAW Image Parameter Settings dialog or if a
white portion of the image is selected in the preview area.
How to Change the File Transmission Format
1. Click the [Preferences] button in the Plug-In Module window.
The Preferences dialog will display.
2. Change the transmission format in the [Send RAW image data to the
application as] option and click [OK].
Transmitting in the TIFF 16 Bits / Channel Format
When [16 bits per color channel] (supported by the EOS D30 only) is selected as the
transmission option for RAW images, images can be transmitted to the application at 16
bits per RGB channel. Although colors are expressed more vividly with the 16-bit setting
than the 8-bit setting, the file size increases dramatically. Moreover, some image editing
applications function only partially with files of this format or cannot open them at all.
Displays the image in the
Preview Area at full size.
Preview Area
Resets the image quality settings to the
state in which the image was shot.
101