ASROCK PRO Series User Manual page 31

RGB LED Header
(4-pin RGB_LED1)
(see p.6, No. 7)
Addressable LED
Headers
(3-pin ADDR_LED1)
(see p.6, No. 8)
(3-pin ADDR_LED2)
(see p.6, No. 26)
(3-pin ADDR_LED3)
(see p.6, No. 25)
This RGB header is used to con-
nect RGB LED extension cable
which allow users to choose from
various LED lighting effects.
Caution: Never install the
RGB LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 48 for further
instructions on this header.
These headers are used to connect
Addressable LED extension ca-
bles which allow users to choose
from various LED lighting
effects.
Caution: Never install the
1
Addressable LED cable in the
GND
DO_ADDR
wrong orientation; otherwise,
VOUT
the cable may be damaged.
*Please refer to page 49 for
further instructions on this
header.
H670M Pro RS
23