ASROCK PRO Series User Manual page 27

Serial ATA3 Connectors
Right Angle:
(SATA3_2:
see p.6, No. 14) (Upper)
(SATA3_3:
see p.6, No. 134 (Lower)
Vertical:
(SATA3_1:
see p.6, No. 13)
(SATA3_0:
see p.6, No. 12)
USB 2.0 Headers
(9-pin USB1_2)
(see p.6, No. 20)
(9-pin USB3_4)
(see p.6, No. 19)
USB 3.2 Gen1 Headers
(19-pin USB3_5_6)
(see p.6, No. 21)
(19-pin USB3_7_8)
(see p.6, No. 11)
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
IntA_P_D+
IntA_P_D-
GND
IntA_P_SSTX+
IntA_P_SSTX-
GND
IntA_P_SSRX+
IntA_P_SSRX-
Vbus
1
Vbus
IntA_P_SSRX-
IntA_P_SSRX+
GND
IntA_P_SSTX-
IntA_P_SSTX+
GND
IntA_P_D-
IntA_P_D+
ID
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+ GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+
Dummy
1
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_2 is occupied by
a SATA-type M.2 device,
SATA3_0 will be disabled.
There are two headers
on this motherboard.
Each USB 2.0 header can
support two ports.
There are two headers on
this motherboard. Each
USB 3.2 Gen1 header can
support two ports.
H670M Pro RS
19