Introduction - Panasonic CF-AX3 Series Operating Instructions Manual

Introduction

Thank you for purchasing this Panasonic product. For optimum performance and safety, please
read these instructions carefully.
In these instructions, the names are referred as follows.
indicates Windows
indicates Windows
„ Terms and illustrations in these instructions
:
CAUTION
:
NOTE
Enter :
Fn + F5 :
Display "Charm":
- :
(Start) - [All Programs] : Click
è :
:
l Some illustrations are simplified to help your understanding and may look different from the
actual unit.
l If you do not log on as an administrator, you cannot use some functions or cannot display
some screens.
l Refer for the latest information about optional products to the catalogs, etc.
l In these instructions, the names and terms are referred as follows.
®
 "Windows 8.1 Pro 64-bit" as "Windows" or "Windows 8.1"
®
 "Windows 7 Professional 32-bit Service Pack 1" and "Windows
vice Pack 1" as "Windows" or "Windows 7"
l For models with the flash memory drive, read the terms "hard disk" and "hard disk drive" as
"flash memory drive".
l
Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are dif-
ferent from the actual screen messages. For example, [Flight mode] may be displayed instead
of [Airplane mode] in some language preference.)
„ Disclaimer
Computer specifications and manuals are subject to change without notice. Panasonic Corpora-
tion assumes no liability for damage incurred directly or indirectly from errors, omissions or dis-
crepancies between the computer and the manuals.
®
8.1 Operating System.
®
7 Operating System.
Conditions that may result in minor or moderate injury.
Useful and helpful information.
Press [Enter] key.
Press and hold [Fn] key, and then press [F5] key.
Align the cursor to the top right (or bottom right) corner of the
screen to display Charm menu.
Alternatively:
Flick toward the center of the screen from the right edge.
Click (Settings) and then click
(Start), and then click [All Programs].
Page in these Operating Instructions or in the Reference Manual.
Reference to the on-screen manuals.
(Power).
®
7 Professional 64-bit Ser-
13