Table of Contents
Advertisement
Section 3 - Configuration
Enable Wireless:
Select this to turn the Wi-Fi module on and off.
Use the drop-down box to select if you want to
use a schedule. Click Add.New to add or change
a schedule.
Select WISP. Client. or WISP. Repeater from the
Wireless Mode:
drop-down menu.
Site Survey:
Click this button to choose the root AP from an
available connection list. If the root AP has wireless
encryption, you have to use the same wireless
security mode to connect the root AP.
Wireless Network
You can input the wireless network name of the
Name:
root AP or click the Site.Survey button to find the
root AP.
802.11 Mode:
Select the appropriate 802.11 mode based
on the wireless clients in your network. The
drop-down menu options are 802.11g.Only, Mixed.
802.11b/g, 802.11b.Only, 802.11n.Only, or Mixed.
802.11b/g/n.
Wireless Channel:
The channel used will be displayed. The channel
will follow the root AP.
Enable Auto Scan:
The Auto.Channel.Scan setting can be selected to allow the DAP-1360L to choose the channel with the least amount of interference.
Channel Width:
Select the appropriate channel width between 20MHz or Auto.20/40MHz from the drop-down menu.
Visibility Status:
Check the box if you do not want the SSID to be broadcast by the DAP-1360L. This prevents the SSID from being seen by site
survey utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-1360L in order to connect to it.
Wireless Security
Select a wireless security setting. Options are None, WEP, WPA, or WPA2. Refer to the Wireless.Security section of this manual for
Mode:
a detailed explanation of the wireless security options.
D-Link DAP-1360L User Manual
WISP Client Router/WISP Repeater Modes
41
Advertisement
Table of Contents
