Advanced Network (Wisp Modes Only) - D-Link DAP-1360L User Manual

Section 3 - Configuration

Advanced Network (WISP modes only)

This function is available if the DAP-1360L is in WISP Client Router or WISP Range Extender Mode. This feature allows you to
change the LAN settings. Please be aware that any changes to the factory default settings may affect the behavior of your
network.
Enable UPnP:
Check this box to use the Universal Plug and Play
(UPnP™) feature. UPnP provides compatibility with
networking equipment, software and peripherals.
Enable WAN Ping
Check this box to allow the WAN port of the
Respond: DAP-1360L to be pinged. Unchecking the box
will not allow the DAP-1360L to respond to pings.
Blocking ping response may provide some extra
security from intruders.
Remote
Remote management allows the DAP-1360L to be
Management:
configured from the Internet by a web browser. A
username and password are still required to access
the Web-Management interface. In general, only a
member of your network can browse the built-in
web pages to perform Administrator tasks. This
feature enables you to perform Administrator
tasks from the remote (Internet) host.
D-Link DAP-1360L User Manual 56