Inserting Sd/Sdhc Cards; Removing An Sd/Sdhc Card - Fujitsu Lifebook P771 User Manual

Inserting SD/SDHC Cards

SD and SDHC cards are inserted in the SD Card slot (Figure 33). To insert a card, follow these steps
•
I
NSERTING OR REMOVING AN
PROCESS MAY DAMAGE THE CARD AND
•
D
O NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD
AS YOU MAY PERMANENTLY DAMAGE THE CARD
1
See your card manual for instructions on the insertion of your card. Some cards may require that your system
is off while inserting them.
2
Make sure there is no card currently in the slot. If there is, see Removing an SD/SDHC Card.
3
Insert your card into the slot with the product label facing up.
4
Push the card firmly into the slot until it is seated in the connector.

Removing an SD/SDHC Card

To remove a card, first see your SD/SDHC card manual for instructions. Some cards may require your
notebook to be in Suspend Mode or Off while removing them. Prior to removing the card from the slot,
first select it using the Safely Remove Hardware icon in the notification area. To remove the card, push
it in to release it, then pull it out.
78 - Secure Digital (SD)/Secure Digital High Capacity (SDHC) Cards
SD/SDHC C
ARD DURING NOTEBOOK
/ LIFEBOOK
OR YOUR
,
YOUR NOTEBOOK
'
S SHUTDOWN OR BOOTUP
.
NOTEBOOK
, .
OR BOTH
: