Installing A Memory Module - Fujitsu Lifebook P771 User Manual

Installing a Memory Module

1
Align the connector edge of the memory upgrade module, chip side up, with the connector slot in the
(Figure 28)
compartment.
Figure 28. Inserting a Memory Module
2
Insert the memory upgrade module at a 45
3
Press the memory upgrade module down into the compartment until it locks underneath the retaining clip. You
will hear a click when it is properly in place.
4
Replace the memory compartment cover.
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR
LIFEBOOK
TO INCREASE SYSTEM MEMORY CAPACITY
angle and press it firmly onto the connector.
o
(Figure 29)
. O
NOTEBOOK NCE IT IS INSTALLED
69 - Memory Upgrade Module
Figure 29. Reinstalling the Memory Cover
,
YOU SHOULD LEAVE IT IN PLACE UNLESS YOU WANT
.