Power Menu - Setting Power Management Feature Controls - Fujitsu Lifebook L470 Manual

S e c t i o n F o u r
POWER MENU –
SETTING POWER MANAGEMENT
FEATURE CONTROLS
The Power menu allows you to set and change
the power management parameters. Follow the
instructions for Navigating through the Setup
Utility to make any changes.
(See page 61.)
Table 4-13 shows the names of the menu fields
for the Power menu, all of the options for each
field, the default settings and a description of
the field's function and any special information
needed to help understand the field's use.
P O I N T
Most power management parameters
can also be set from the Windows 98 or
Windows NT 4.0 desktop without enter-
ing the CMOS setup utility. Using
PowerPanel by Phoenix Technologies to
change the settings in the power profile
does not change what is stored in the
CMOS memory. (See pages 51-52.)
98
PhoenixBIOS Setup Utility
Main Advanced Security Power
Power Savings: [Customized]
Hard Disk Timeout: [Off]
Video Timeout: [Off]
Idle Mode: [On]
Standby Timeout: [4 Minutes]
Auto Suspend Timeout: [15 Minutes]
Suspend Mode: [Suspend]
Auto Save To Disk: [Off]
Resume On Modem Ring: [Off]
Resume On Time: [Off]
Resume Time: [00:00:00]
Advanced Features
F1 Help Select Item -/Space
ESC Exit Select Menu Enter
Figure 4-13 Power Menu
P O I N T
In Windows 98 Auto-Suspend Timeout, Hard Disk Timeout, and Video
TImeout features are available exclusively through the operating system.
Boot Info Exit
Item Specific Help
Select Power Management
Mode. Choosing modes
changes system power
management settings.
Maximum Power Savings
conserves the greatest
amount of system power
while Maximum
Performance conserves
power but allows
greatest system
performance. To alter
these setting, choose
Customize. To turn off
power management,
choose Disabled.
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit