Media Drive; Media Player Software; Loading A Dvd, Cd, Cd-R, Cd-Rw, Or Combo ("Media") - Fujitsu Lifebook E7010 User Manual

B5FH-4491-01EN-00.book Page 46 Friday, April 19, 2002 11:24 AM
L i f e B o o k E S e r i e s – S e c t i o n 4

Media Drive

Your Fujitsu LifeBook notebook contains a media player
drive which is either a CD, DVD, or DVD/CD-RW
combo player. A DVD player gives you access to movie,
software, and audio DVD/CDs. A DVD/CD-RW player
allows you to write data onto recordable CDs in addition
to all of the standard DVD drive functions.

MEDIA PLAYER SOFTWARE

DVD model only: With the media player drive and media
player software you can play DVD movies on your Life-
Book notebook. The media player includes controls
which allow you to take full advantage of the features of
a DVD movie, as well as standard features such as fast
forward, fast reverse, pause, etc.
DVD/CD-RW Combo model only: With the combo drive,
you can play DVD movies, read audio CDs, and write
data onto recordable CD-R or CD-RW discs.
P O I N T S
I Prior to using your Media Player, you must install
the Media Player software. Refer to the applicable
readme file on the Driver Applications CD-ROM for
instructions on installing you Media Player software.
You should periodically check the Fujitsu Web site at
I
www.fujitsupc.com for current updated drivers.
C A U T I O N
Do not operate your media player drive unless your
LifeBook notebook is sitting on a flat surface. Using a
drive when the system is not level may damage the
drive or prevent proper operation.
46
Figure 4-4. Media Player Drive
P O I N T
Prolonged use of the media player drive, such as
watching a DVD movie, will substantially reduce your
battery life.
LOADING A DVD, CD, CD-R, CD-RW, OR
COMBO ("MEDIA")
To load a disc into your media player drive, follow these
steps:
1. Push and release the eject button on the front of the
media player drive to open the holder tray. The tray
will come out of the notebook a short distance.
2. Gently pull the tray out until a media disc can easily
be placed in the tray.
C A U T I O N
There may be a protective sheet in the tray from when it
was shipped; please make sure it is removed before oper-
ating the drive, otherwise your drive may be damaged.
3. Place the media into the tray, label side up, with the
hole in the center of the disc. Snap the disc onto the
raised circle in the center of the tray.
4. Gently push the holder tray back in until you hear a
click. (Figure 4-5)
P O I N T
If you have disabled the Auto Insert Notification
Function, you will have to start the drive from your
desktop, since your notebook will not automatically
recognize that media has been loaded.
DVD/CD Eject Button
DVD/CD Holder Tray