Section Two; Starting Your Lifebook B112; Power Sources - Fujitsu Lifebook B112 User Manual

S e c t i o n T w o

SECTION TWO

STARTING YOUR LIFEBOOK B112

FROM FUJITSU
This section describes the processes of starting
your LifeBook for the first time, initial software
setup and registration.

POWER SOURCES

Your notebook has four possible power sources:
the primary Lithium ion battery; the AC adapter;
an optional auto/airline adapter; or an optional
dual Lithium ion battery configuration.
C A U T I O N
The primary Lithium ion battery is not
fully charged when you purchase your
notebook. Initially you will need to con-
nect the AC adapter or the auto/airline
adapter to use your notebook. If you pur-
chase a second Lithium ion battery it will
not be charged when you get it. You will
need to charge it prior to use. It can take
10
up to four (4) hours to charge a single
battery if your notebook is turned off or
is in Suspend mode. If your notebook is
in use it can take up to nine (9) hours
or more to charge a single battery in
your notebook.
Figure 2-1 Connecting the AC Adapter
Connecting the Power Adapters
The AC adapter or an optional auto/airline
adapter provides power for operating your
notebook and charging the batteries.
(Figure 2-1.)
To Connect the AC Adapter
1. Plug the DC Output cable of the AC
adapter into the DC Power jack on
the right side of your notebook.
2. Plug the AC adapter into an AC
electrical outlet.
To Connect the Optional Auto/airline Adapter
1. Plug the DC Output cable into the
DC Power jack on the right side of
your notebook.
2. Plug the auto/airline adapter plug into
the cigarette lighter of a car or other
vehicle with the ignition key in the On
or the Accessories position or into the
DC Power jack on an airplane seat.