Lighting
Exterior Lighting
Flash-to-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Dome Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Reading Lamps . . . . . . . . . . . . . . . . . . . . . . . . 130
Exit Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Exterior Lighting
Exterior Lamp Controls
The exterior lamp control is on the turn
signal lever.
Turn the control to the following positions:
: Turns off the exterior lamps and
deactivates AUTO mode. The knob returns to
the AUTO position after it is released. Turn
to
again to reactivate AUTO mode.
AUTO : Automatically turns the exterior
lamps on and off, depending on outside
lighting.
: Turns on all lamps, except the
headlamps.
: Turns on the headlamps together with
the parking lamps and instrument panel
lights.
Lighting
IntelliBeam System
This system turns the vehicle's high-beam
headlamps on and off according to
surrounding traffic conditions.
The system turns the high-beam headlamps
on when it is dark enough and there is no
other traffic present.
This light
comes on in the instrument
cluster when the IntelliBeam system is
enabled.
Turning On and Enabling IntelliBeam
To enable the IntelliBeam system, press the
button on the end of the turn signal lever
when the exterior lamp control is in the
AUTO or
position.
Driving with IntelliBeam
The system only activates the high beams
when driving over 40 km/h (25 mph).
125