Table of Contents
Advertisement
The Charge Complete By dialog displays:
A time selector that allows you to specify
the hour, the minutes in 15 minute
increments at which the vehicle will reach
the desired Charge Level.
z
An
allowing you to close the Charge
Complete By dialog. Settings made here
are automatically saved when the dialog
is exited.
Drag the appropriate sections of the time
selector to set the Charge Complete By time.
z
Touch
to exit the Charge Complete By
dialog and accept the changes made. When
the dialog closes, the charging information
listed on the Charging screen will update to
reflect any changes made. If the time
specified does not allow the vehicle enough
time to reach the desired Charge Level, a
message displays and you can choose to
alter either Charge Complete By time or
desired Charge Level.
To adjust desired Charge Level in Charge
Later mode, see Charge Now earlier in this
section.
Setting the Cabin Pre-Conditioning
preference:
Touch the switch to turn on Cabin
Pre-conditioning. Cabin Pre-Conditioning
temperature can be set in Settings, or by
touching Cabin Pre-Conditioning on this
screen.
Active Charging
During an active charging session, the
Charging screen displays and continuously
updates the following items:
Text indicating the vehicle s current
charging status.
Current Range: The range the vehicle is
capable of driving at the current charge
level.
Range Increase Rate: How much range is
accumulating per hour of charging.
Instruments and Controls
Charge Complete At: The estimated time
at which the vehicle will reach the desired
Charge Level. This is displayed if there is
a longer charge time remaining.
Charge Complete In: The amount of time
required to complete the active charging
session. This is displayed if there is a
shorter charge time remaining.
The Charge Level Gauge ranging from
80% to 100% with a portion displaying
the vehicle s current charge level. Use
0
and
or drag the white marker to
adjust the desired Charge Level.
To update the desired Charge Level for the
active charging session, drag the marker on
the Charge Level Gauge or touch the
0
and
.
Touching the Stop Charge button at any
time ends the active charging session and
presents a summary of the current vehicle
Range, Charge Level, and amount of Range
Gained in this charging session. For
information on beginning a charging session,
see Plug-In Charging 0 255.
111
1
1
Advertisement
Table of Contents
