Connecting External Devices - Fujitsu Siemens Computers AMILO Pro V3205 Operating Manual

Connecting external devices

Before you connect or disconnect any devices from your notebook please read the safety
!
notes in the "Important notes" chapter.
Always read the documentation supplied with the device you wish to connect.
Never connect, or disconnect cables during a thunderstorm.
Never pull on a cable when disconnecting it. Always hold the plug.
Follow the steps below in order, when connecting or disconnecting devices to your
notebook:
Connecting devices to notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and all devices from the mains sockets.
3. Connect the cables for your external devices following the supplied instructions.
4. Plug all power cables into the mains sockets.
Disconnecting devices from notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and all devices from the mains sockets.
3. Disconnect the cables for your external devices following the supplied instructions.
Some of the external devices require special drivers (see the operating system and
i
external device documentation).
10600690568, edition 1 49