The Lcd Screen Of The Notebook Remains Blank; The Lcd Screen Is Difficult To Read; The External Monitor Stays Blank - Fujitsu Siemens Computers AMILO D1845 Operating Manual

Troubleshooting and tips

The LCD screen of the notebook remains blank

Monitor is switched off
► Press a key or enter the password
External monitor or television set connected
► Press the key combination Fn + F4 (selecting internal/external display).

The LCD screen is difficult to read

Reflection
► Turn the notebook or alter the tilt of the LCD screen.

The external monitor stays blank

If your screen remains blank this may be due to the following:
Monitor is switched off
► Switch the external monitor on.
Power saving has been activated (screen is blank)
► Press any key to continue.
Brightness is set too dark
► Adjust the brightness of the monitor.
Screen output is set to the notebook's LCD screen
► Press the key combination Fn + F4 (selecting internal/external display).
The external monitor's power cable or data cable is not connected properly
► Switch off the external monitor and the notebook.
► Check whether the power cable is plugged properly into the external monitor and into the
power socket.
► Check whether the data cable is properly connected to the notebook and the external monitor
(if it is plugged in with a connector).
► Switch on the external monitor and the notebook.
44
10600444862