Starting Your Notebook For The First Time - Fujitsu 270Dx User Manual

STARTING YOUR NOTEBOOK
FOR THE FIRST TIME
Booting the System
The first time that you turn on your notebook
you will need to attach your AC adapter
because the battery is not charged when you
get your machine. We strongly recommend
that you not attach any other external devices
and do not put any CDs or fl oppy disks in your
drives until you have gone through the initial
power on sequence.
When you turn on your notebook for the first
time it will display a Fujitsu lo go on the screen.
If you do nothing the system will read the hard
drive for the operating system software, flash
the notebook configuration information on the
screen,and then the Windows 95 Setup Wizard
Screen will appear. (See Power On on pages 23-
24 for additional help.) You will then be stepped
through the condition of use process. You must
complete this initial process before you will be
able to use your notebook. (If you wish to
access the BIOS setup utility before you go
through the condition of use process you must
S e t t i n g U p Y o u r L i f e B o o k 2 0 0 S e r i e s
press the F2 key while the Fujitsu logo is still
visible. If you press the Esc key while the
Fujitsu logo is still present you will get a dialog
box which will allow you to select which drive
is to be used for finding the operating system.)
If you turn off the power without using the o n
screen Cancel button you will get an error
message when you start your notebook again.
Conditions of Use Process
The first time you start your notebook you
must confirm your acceptance of the copyright
limitations for your pre-installed software.
After you complete the Condition of Use
process these screens will not appear again.
There are 6 screens to read carefully and
respond to.
You cannot use your notebook until this
Condition of Use process is completed. The
bottom of each screen has a <Back button, a
Next> button and a Cancel button which
are activated by the integrated ErgoTrac cursor
control and button click. The <Back button
will return you to the previous screen. The
L i f e B o o k 2 0 0 S e r i e s f r o m F u j i t s u
Next> button activates any choices or
information you have entered and takes you on
to the next screen. The Cancel button allows
you to stop the setup process.
If you stop the process your notebook will
start up at the beginning of the Windows 95
Setup Wizard.
The screens you will be required to respond
to are described with the required action.
User Information
Fill in your name and your company name as
you want the software licensed. To step from the
name blank to the company blank press the Tab
key. When the information has been entered
click on the Next> button. You will not be
allowed to continue until you make an entry.
License Agreement
Read the agreement carefully. You can scroll
through the text using the integrated ErgoTrac
pointing device to activate the scroll bar or use
the up arrow and down arrow
move up and down the text one line at a time,
keys to
13