Using The Camera Shooting Software; Connecting The Camera And Pc - FujiFilm Finepix S1 Pro Software Manual

Using the Camera Shooting Software

* The examples used in these descriptions are for Windows 98. The screens
shown on Macintosh computers are different, but the procedures are the same.

Connecting the Camera and PC

Refer to the Owner's Manual supplied with your camera for information on using the
camera.
CAUTION Do not connect the camera to your PC until you have installed the Camera
Shooting Software. Refer to the Camera Shooting Software Quick Start
Guide for information on installing the software.
1. Switch on your PC.
2. Connect the AC power adapter to the camera
and switch the camera on. In the Setup screen,
select "PC Mode > Shoot" and then close the
Setup screen.
3. Connect the camera to your PC using a
USB cable.
CAUTION • Only one camera can be
connected
Successful operation is not
guaranteed
cameras are connected all at
once.
• Connect the camera and PC
using a direct USB cable
connection.
operation is not guaranteed if
the camera is connected
through a USB hub.
• If you are using Windows
2000, the "Digital Signature
Not Found" message appears
the first time you connect the
camera after installing the
Camera Shooting Software. Click [Yes] and continue with the installation.
to the PC.
if multiple
Successful
5
Camera Shooting Software