FujiFilm Finepix S1 Pro Software Manual page 24

4. When the specified number of time-lapse photography shots has been taken, the
[Close] button is enabled. Click the [Close] button to close the "Shooting time-lapse
pictures..." message box.
• Clicking the [Cancel] button stops time-lapse photography stops and closes the
"Shooting time-lapse pictures..." message box. The images that have already been
saved to files on the PC are left on the PC.
5. The settings specified in the "Time-lapse photography settings" dialog box are
displayed in the upper part of the "Shooting time-lapse pictures..." message box.
The bottom half of the "Shooting time-lapse pictures..." message box shows the
progress information for time-lapse photography. The following types of progress
information are displayed:
Time remaining before next shot
Counts down the time remaining to the next shot.
Estimated completion time
Shows the predicted finishing time for time-lapse photography.
Number of time overrun frames
Displays the number of shots where shooting and saving to file could not be
completed in the specified interval between shots.
The number of time-overrun frames may increase due to factors such as the PC
processing load. In this event, click the [Cancel] button in the "Shooting time-lapse
pictures..." message box to stop time-lapse photography, reset the interval
between shots and then begin time-lapse photography again.
Largest time overrun
Displays the time taken by the longest time overrun. When you reset the time
between shots, set a new value that is at least as long as the current time
between shots plus the largest time overrun.
TIP • The time-lapse photography settings are saved provided they are not
modified.
• You cannot open and view a saved file in the Camera Shooting
Software. Use the Exif Viewer software application provided on the
enclosed CD-ROM.
• File names are automatically assigned in the "DSCFxxxx.jpg" or
"DSCFxxxx.tif" format (where "xxxx" is a number between 0000 and
9999).
• To ensure stable operation during time-lapse photography, insert the
battery-type adapter into the camera and connect the AC power adapter.
• If the "Flash charging..." message appears, reset the time-lapse
photography settings with a larger interval between shots.
Camera Shooting Software
24