Din Mount Installation; To Secure The Front Panel - Pioneer DEH-S1200UB Operation Manual

DIN mount installation
1 Insert the supplied mounting sleeve
into the dashboard.
2 Secure the mounting sleeve by using
a screwdriver to bend the metal tabs
(90°) into place.
G) Dashboard
®
Mounting sleeve
• Make sure that the unit is installed
securely in place. An unstable
installation may cause skipping or other
malfunctions.
When not using the supplied
mounting sleeve
1 Determine the appropriate position
where the holes on the bracket and
the side of the unit match.
2 Tighten the screws on each side.
G) Screw
®
Mounting bracket
®
Dashboard or console
• Use either truss (5 mm x 9 mm) or
flush surface (S mm x 9 mm) screws,
depending on the bracket screw holes.
Removing the unit (installed with the
supplied mounting sleeve)
1 Remove the trim ring.
G)Trim ring
®
Notched tab
• Releasing the front panel allows easier
access to the trim ring.
• When reattaching the trim ring, point
the side with the notched tab down.
2 Insert the supplied extraction keys
into both sides of the unit until they
click into place.
3 Pull the unit out of the dashboard.
To secure the front panel
The front panel can be secured with the
supplied screw.
~ (j)S"ew
Basic operation
DEH-S1200UB
USB port
Detach button
Display window
BAND/!:) AUX input jack (3.5 mm stereo jack)