Turning On And Off / Setting The Date And Time; Correcting The Date And Time / Changing The Date Order - FujiFilm Finepix E550 Owner's Manual

TURNING ON AND OFF / SETTING THE DATE AND TIME

1
2
ＤＡＴＥ／ＴＩＭＥ ＮＯＴ ＳＥＴ ＤＡＴＥ／ＴＩＭＥ ＮＯＴ ＳＥＴ
ＳＥＴ ＳＥＴ ＮＯ ＮＯ
3
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＹＹＹＹ．ＭＭ．ＤＤ ＹＹＹＹ．ＭＭ．ＤＤ
２００４ １ ． １ ２００４ １ ． １
１２ ： ００ ＡＭ １２ ： ００ ＡＭ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
0 1 0 2
4
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＹＹＹＹ．ＭＭ．ＤＤ ＹＹＹＹ．ＭＭ．ＤＤ
２００４ ． ９ ． ２４ ２００４ ． ９ ． ２４
１０ ： １０ ： ００ ００ ＡＭ ＡＭ
ＳＥＴ ＳＥＴ ＣＡＮＳＥＬ ＣＡＮＳＥＬ
14
Press the "POWER" button to turn the camera on.
When turning the camera on, the viewfinder lamp
lights green.
Press the "POWER" button again to turn the
camera off.
The lens moves when the camera is in "
Photography mode. Take care not to obstruct the
lens.
Obstructing the lens will cause damage and
" " or " " will appear.
8 9
Take care also not to get fingerprints on the
camera lens as this will result in impaired image
quality in your shots.
When using the camera for the first time after
purchasing, the date and time are cleared. Press
the "MENU/OK" button to set the date and time.
●
!
If the message (see figure at left) does not appear, refer to
"Correcting the date and time" (➡P.15) and check and correct
the date and time settings.
●
!
The message also appears when the camera battery has
been removed and the camera has been left for a long
period.
●
!
To set the date and time later, press the "BACK (DISP)"
button.
●
!
If you do not set the date and time, this message will appear
each time you turn the camera on.
1 Press "d" or "c" to select Year, Month, Day,
Hour or Minute.
2 Press "a" or "b" to correct the setting.
●
!
Holding down "a" or "b" changes the numbers continuously.
●
!
When the time displayed passes "12:00", the AM/PM setting
changes.
Once you have set the date and time, press the
"MENU/OK" button. Pressing the "MENU/OK"
button changes the camera to Photography or
Playback mode.
●
!
At the time of purchase and after leaving the camera for a
long period with the battery removed, settings such as the
date and time are cleared. Once the AC power adapter has
been connected or the battery has been installed for 30
minutes or more, the camera settings will be retained for
roughly 3 hours even if both sources of power are removed.

CORRECTING THE DATE AND TIME / CHANGING THE DATE ORDER

1
1 0 3 0
q "
2
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
1
ＢＥＥＰ ＢＥＥＰ
ＳＨＵＴＴＥＲ ＳＨＵＴＴＥＲ
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
0 1
3
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＹＹＹＹ．ＭＭ．ＤＤ ＹＹＹＹ．ＭＭ．ＤＤ
２００４ ９ ． ２４ ２００４
１０ ： ００ ＡＭ １０ ： ００ ＡＭ
0 1 0 2
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＭＭ／ＤＤ／ＹＹＹＹ ＭＭ／ＤＤ／ＹＹＹＹ
９ ／ ２４ ／ ２００４ ９ ／ ２４ ／ ２００４
１０ ： ００ ＡＭ １０ ： ００ ＡＭ
1 0 2 0
1 Press the "MENU/OK" button to display the
2 0
menu on the LCD monitor.
2 Press "d" or "c" to select "
then press "a" or "b" to select "SET-UP".
3 Press the "MENU/OK" button.
ＯＰＴＩＯＮ ＯＰＴＩＯＮ
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＬＣＤ ＬＣＤ
1 Press "d" or "c" to move to option 2 and then
press "a" or "b" to select "DATE/TIME".
２
3 4
2 Press "c".
：
：
ＳＥＴ ＳＥＴ
：ＳＥＴ ：ＳＥＴ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
0 2
Correcting the date and time
1 Press "d" or "c" to select Year, Month, Day,
Hour or Minute.
９ ． ２４ 2 Press "a" or "b" to correct the setting.
3 Always press the "MENU/OK" button after the
settings are completed.
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
0 3
●
!
Holding down "a" or "b" changes the numbers continuously.
●
!
When the time displayed passes "12:00", the AM/PM setting
changes.
Changing the date order
1 Press "d" or "c" to select the date order.
2 Press "a" or "b" to set the order. Refer to the
table below for details of the settings.
3 Always press the "MENU/OK" button after the
settings are completed.
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
Date order
0 3
Displays the date in the "year. month. day"
YYYY.MM.DD
format.
Displays the date in the "month / day / year"
MM/DD/YYYY
format.
Displays the date in the "day. month. year"
DD.MM.YYYY
format.
F " OPTION and
1
Explanation
15