Gigabyte S461-3T0 User Manual page 56

Parameter
COM1/Serial LAN/Legacy/
Serial Port for Out-of-Band
EMS Console Redirection
Settings (continued)
(Note) Advanced items prompt when this item is defined.
BIOS Setup
Description
Legacy OS Redirection Resolution
Š
– Specifies the number of Rows and Columns supported for the
Legacy OS redirection.
– Options available: 80x24/80x25. Default setting is 80x24.
Putty KeyPad
(Note)
Š
– Selects FunctionKey and KeyPad on Putty.
– Options available: T100/LINUX/XTERMR6/SCO/ESCN/VT400.
Default setting is VT100.
Redirection After BIOS POST
Š
– This item allows user to enable console redirection after OS has
loaded.
– Options available: Always Enable/Boot Loader. Default setting is
Always Enable.
Legacy Console Redirection Settings
Š
– Selects a COM port to display redirection of Legacy OS and
Legacy OPROM Messages.
– Options available: COM1/Serial Over LAN. Default setting is
COM1.
Out-of-Band Mgmt Port
Š
– Microsoft Windows Emergency Management Service (EMS) allows
for remote management of a Windows Server OS through a serial
port.
– Options available: COM1/COM2 Serial Over LAN. Default setting
is COM1.
- 56 -
(Note)
(Note)