D-Link DWR-980 Quick Installation Manual page 20

DWR-980 Quick Installation Guide
In order to connect your device to a wireless ISP (WISP), on the Device
mode page, from the Connection method list, select the Wi-Fi value. In
this mode you can connect your device to another access point, configure a
WAN connection, set your own settings for the wireless network in the
2.4GHz and 5GHz bands, configure LAN ports to connect an STB or VoIP
phone, and set your own password for access to the web-based interface of the
device.
In order to connect your device to a private Ethernet line, on the Device
mode page, from the Connection method list, select the Ethernet (LAN)
value. In this mode you can configure one of the router's LAN port as the
WAN port, configure a WAN connection, set your own settings for the
wireless network in the 2.4GHz and 5GHz bands, configure LAN ports to
connect an STB or VoIP phone, and set your own password for access to the
web-based interface of the device.
When the operation mode is selected, click the NEXT button.
20