D-Link DWR-980 Quick Installation Manual page 11

Wireless ac1200 4g lte router with vdsl2 support, gigabit ethernet ports, and 2 fxs ports

Hide thumbs Also See for DWR-980:

Table of Contents

DWR-980

9. In the opened window, in the list of available wireless networks, select the

wireless network DWR-980 (for operating in the 2.4GHz band) or

DWR-980-5G (for operating in the 5GHz band) and click the Connect

button.

10. In the opened window, enter the network key (see WPS PIN on the

barcode label on the back panel of the device) in the Security key field

and click the OK button.

11. Wait for about 20-30 seconds. After the connection is established, the

network icon will be displayed as the signal level scale.

If you perform initial configuration of the router via Wi-Fi connection,

note that immediately after changing the wireless default settings of the

router you will need to reconfigure the wireless connection using the

newly specified settings.

Quick Installation Guide

Table of Contents